Complaints Reported By The Department Of Transportation For
1987 PONTIAC Vehicles
This data is brought to you by AboutPolitics.com
Select A Complaint From The List Below For More Details
|
PONTIAC: 6000 |
 Fuel Efficiency Ratings for
1987 PONTIAC: 6000 Vehicles
Data provided by U.S. Department of Energy and the EPA |
| Model | Displacement | Cylinders | Transmission | Drive | City MPG | Highway MPG |
Recall Information for
1987 PONTIAC: 6000 Vehicles
Data provided by the National Highway Traffic Safety Administration (NHTSA) |
| Recalled Component | FUEL SYSTEM, GASOLINE |
| Description of Defect | CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE. |
| Consequences of Defect | THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR. |
| Corrective Action | HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1). |
| Notes | THIS RECALL ONLY PERTAINS TO AFTERMARKET FRAM FUEL FILTERS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE VEHICLES LISTED.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV. |
|
| Recalled Component | SERVICE BRAKES, HYDRAULIC:ANTILOCK |
| Description of Defect | THE ANTI LOCK BRAKE SYSTEM (ABS) PRESSURE/WARNING SWITCH MAY EXHIBIT BRAKE FLUID SEEPAGE WHICH EVENTUALLY CAN LEAD TO LOSS OF THE BRAKE SYSTEM HYDRAULIC PUMP MOTOR. ADDITIONALLY, THE HYDRAULIC PUMP MOTOR AND ABS ELECTRICAL RELAYS MAY HAVE BEEN EXPOSED TO WATER CONTAMINATION DURING VEHICLE ASSEMBLY. THIS CONDITION CAN CAUSE LOSS OF THE HYDRAULIC PUMP MOTOR AND/OR LOSS OF THE ABS FUNCTION. |
| Consequences of Defect | LOSS OF THE HYDRAULIC PUMP MOTOR WOULD RESULT IN A TOTALLOSS OF REAR BRAKES AS WELL AS POWER ASSIST TO THE FRONT BRAKES. THE RED BRAKEWARNING LIGHT WOULD ILLUMINATE AND STAY ON. IF THIS WARNING IS NOT HEEDED, ALOSS OF REAR BRAKES AT A TIME WHEN MINIMUM STOPPING DISTANCE IS REQUIRED COULDRESULT IN A VEHICLE CRASH. AN INOPERATIVE ABS ELECTRICAL RELAY COULD CAUSELOSS OF THE ABS FUNCTION, BUT NORMAL POWER ASSISTED BRAKING WOULD BE RETAINED.THE AMBER ANTI LOCK WARNING LIGHT WOULD ILLUMINATE AND STAY ON. |
| Corrective Action | THE ABS AND HYDRAULIC PUMP MOTOR ELECTRICAL RELAYS AND 30 AMP FUSES WILL BE REPLACED. IN ADDITION, THE HYDRAULIC PUMP MOTOR ASSEMBLY AND PRESSURE/WARNING SWITCH WILL BE INSPECTED AND, IF REQUIRED, REPLACED. |
| Notes | SYSTEM: BRAKES.VEHICLE DESCRIPTION: PASSENGER CARS WITH ANTI LOCK BRAKES. |
|
| Recalled Component | VISIBILITY:WINDSHIELD |
| Description of Defect | POOR BOND ADHESION BETWEEN THE WINDSHIELD GLASS AND MOUNTING COULD ALLOW THE WINDSHIELD TO SEPARATE DURING A 30 MPH FRONTAL BARRIER TEST REQUIRED BY FMVSS 212. |
| Consequences of Defect | IF WINDSHIELD GLASS SEPARATION OCCURS DURING ANACCIDENT, AN UNBELTED OCCUPANT COULD BE EJECTED FROM THE VEHICLE AND INJURED. |
| Corrective Action | REINSTALL WINDSHIELDS TO ASSURE PROPER BOND ADHESION. |
| Notes | SYSTEM: WINDSHIELD/FMVSS 212.VEHICLE DESCRIPTION: PASSENGER CARS. |
|
|
|
Forum 
